omid_v reviews

Reviewed

Dual-Motor Height Adjustable Sit-to-Stand Desk Riser Frame - White

It’s the only adjustable frame in the market that let you go below 70cm. I love the great degree of adjustability and how fast it can raise/lower the desk.

Mar 21, 2023

Reviewed

Garbage Bags Strong Kitchen Trash Bag 18 X 20 in, Black, 30Pcs/Pack, 18L/4.76Gal - Shopper+

5/5

Great price. Good quality. Happy customer 🙂

Mar 21, 2023

Reviewed

Multi-Modular Plug Crimps, Strips, and Cuts Tool with Ratchet - Monoprice®

4/5

It works fine. However, I had a hard time using the locking mechanism to keep the tool in the folded position.

Nov 23, 2021

Reviewed

Cat6 23AWG UTP Solid Bulk Cable CMR Rated UL Certified 1000ft - PrimeCables® - Blue

5/5

Good quality with affordable price. Although I must say that I've only tested the two ends of the wire after installation, but I didn't actually use the cable for data transmission or test it while transmitting data yet.

Nov 23, 2021

Reviewed

Easy Stripper for UTP / STP Telecom Wire - PrimeCables®

3/5

Works fine. Although you should be careful while using, as it can also cut the wires as well if you turn it around the cable more than once or twice.

Nov 23, 2021

Reviewed

HP 410X Compatible Toner Cartridge Combo BK/C/M/Y High Yield - Moustache®

2/5

As some other users noted, these cartridges have a serious issue when they reach around 60% remaining level (i.e. after using about 40% of the toner). In the beginning though, they work fine and produce good print quality, which considering their affordable price, is impressive. I purchased this 4-cartridge bundle back in May 2019. I didn't use the colours as often as the black ink, so I didn't reach that 60% remaining stage of the colour cartridges until a few months ago. After running around 60% remaining level, colour prints became very poor quality, which looked like being washed out and faded while printing, resulting in inconsistent and sometimes near-invisible colours. When I tried to diagnose the issue, I noticed the cartridges were leaking, with the cyan cartridge leaking so bad that I had to handle it very carefully to avoid damaging the printer or making a dust cloud around myself! I replaced the cartridges with authentic HP products and got the excellent print quality that I was looking for. While the Moustache's black cartridge has been producing sharp and consistent blacks, recently I am receiving a smudge pattern on one side of my prints (as seen on the edge of the prints that had the authentic HP colours and Moustache black cartridges). I'm not sure if it's also because of the Moustache cartridge or if something had been damaged, but I suspect if I replace the black cartridge with an authentic HP one, the problem with be solved (I have used the cleaning options of the printer several times without any success)! I should note that I don't remember experiencing such problems with the authentic HP cartridges that were included in the printer box when I purchased my machine; they worked fine until they were completely used. * About attached pictures: the “HP demo” sheet, which was printed using only Moustache cartridges, is older than the “York Region Waste Depot Guide” sheet that was printed only with Moustache cartridges. Therefore, the colours were much worse (in fact, terrible) on the “York Region” sheet than the older “HP demo” sheet, probably because the Moustache cartridges would deteriorate rapidly.

Nov 23, 2021

Reply by our customer service

Hi Omid, Thank you for bringing this matter to our attention. We're very sorry we failed to meet your expectations. We would appreciate another chance to earn your business. Kindly check your email for additional assistance.

Reviewed

Reviewed

Reviewed

Reviewed

Reviewed

Reviewed

Reply by our customer service

Switch to United States